Peopoly Giga 800: laser bed leveling and open sales for the pellet FGF printer
Peopoly opened general sales of the Giga 800 on October 22, 2026, a large-format pellet FGF printer already presented in May. The main new feature is the integration of a laser build bed leveling system, also developed in response to feedback from early users.
The starting price is set at $15,000 EXW. The acronym indicates an ex-works commercial term, without transport, duties, taxes, or local support.
- Build volume: 800 × 800 × 800 mm (0.64 m² bed)
- FGF technology with screw extruder for thermoplastic pellets
- New laser bed leveling system
- Base price: $15,000 EXW
- Klipper firmware and Orca Slicer compatibility
FGF vs FDM: two approaches to extrusion
The difference between filament and pellet is not only economic. It changes the physics of the process and the achievable performance.
In traditional FDM, filament is mechanically pushed into the hotend. FGF (Fused Granulate Fabrication), on the other hand, uses thermoplastic granules fed into a screw extruder.
The screw conveys, compresses, heats, and homogenizes the material before it exits the nozzle. This setup allows high throughput and comes close to the material supply formats used in the plastics industry.
The economic advantage is not automatic. Extrusion consistency depends on screw geometry, granule size, moisture, heating, material rheology, and flow-stop strategies.
The inertia of a screw extruder complicates the production of small details and sudden speed changes. Printing a continuous thick wall is different from manufacturing thin models with numerous retractions or high-quality visible surfaces.
Why laser leveling is crucial on 800 mm
On a 0.64-square-meter bed, even small height variations become problematic for first-layer adhesion.
The nominal volume of 800 × 800 × 800 mm means the bed occupies 0.64 square meters. A small variation in bed height, negligible on small beds, becomes critical when the nozzle deposits wide beads over large surfaces.
Excessive distance reduces adhesion. Insufficient distance can damage the nozzle or the bed. The laser system addresses this specific requirement of the Giga 800's size.
Compatible applications and materials
The Giga 800 targets large-sized components where the cost of pellet material offers economic advantages compared with filament.
Target applications include polymer components of significant size, tools, equipment, and architectural models. The printer is compatible with ABS, ASA, TPU, PETG, PLA, and polyamides.
The machine uses Klipper firmware and is compatible with Orca Slicer for file preparation. The mechanical architecture adopts closed-loop servomotors and a CoreXY system.
Availability and considerations for industrial purchasing
It is important to distinguish between availability declared by the manufacturer and the presence of distributors or guaranteed services in each country.
On the official website, there are references to both general sales and the previous Early Adopter phase. The actual conditions should be confirmed before an industrial order.
The EXW price of $15,000 does not include international shipping costs, customs clearance, VAT, installation, or local service contracts. For industrial applications, it is necessary to verify the presence of qualified technical support in one's own territory.
Peopoly is known for resin models and for the Magneto X FFF series. The Giga 800 represents the manufacturer's entry into the large-format FGF printer segment.
article written with the help of artificial intelligence systems
Q&A
When did Peopoly open general sales for the Giga 800?
Peopoly opened general sales for the Giga 800 on October 22, 2026. The printer had already been presented in May of the same year.
What is the build volume of the Peopoly Giga 800?
The Giga 800 has a build volume of 800 × 800 × 800 mm, with a build plate covering 0.64 square meters.
What is the difference between FGF and FDM according to the article?
In FDM the filament is mechanically pushed into the hotend, while FGF uses thermoplastic pellets fed into a screw extruder that conveys, compresses, heats, and homogenizes the material. This allows high throughput and comes closer to the supply formats of the plastics industry.
Why is laser leveling important on an 800 mm bed?
On a 0.64 square meter bed, even small height variations become critical for first-layer adhesion. Excessive distance reduces adhesion, insufficient distance can damage the nozzle or bed, and the laser system addresses this specific need.
What is the starting price of the Peopoly Giga 800 and what does EXW mean?
The starting price is set at $15,000 EXW. The acronym indicates a commercial ex-works term, without transport, duties, taxes, or local support.
